Home Company Products Documents News Contact Work with Us
 
 
 
 
Products & Services
BLASTING
PAINTING
PERSONAL PROTECTION
INSPECTION

 

Documents
News
Contact

 

 

 

Wet Blast Catalogue

 

Wet Blast Accessories

 Different devices to reduce dust caused during blasting jobs

 Water-Jet Venturi Blast Nozzle
 
·     High performance wet blast Venturi blast nozzle.
·     Mixs water into abrasive/air stream before it exits the nozzle.
·     Reduces dust caused by blasting process.
·     Can be used as a simple dry blasting nozzle too.
·     Requires 0.75 to 5.5 liters/min. depending on level of dust suppresion.
·     Water pressure: 2 to 4 bar.
 
 
Water Ring
 
·     Low cost device to reduce the dust caused by blasting process.
·     Fits easily to standard blast nozzles with screws.
·     Mixs water into abrasive/air stream before it exits the nozzle.
·     Fits all standard blast nozzles. Max. outside nozzle diameter: 40 mm.
·     Requires 0.75 to 5.5 liters/min. depending on level of dust suppresion.
·     Water pressure: 2 to 4 bar.
 
 
Wet Blast Attachment
 
·     Internal mixing device to dust suppresion.
·     Higher performance rates respect water rings systems .
·     Water flow regulator, allows to adjust the water volume.
·     Fits RNH-2/50 large thread nylon nozzle holders and standard blast nozzles.
·     Water pressure: 2 to 4 bar.
 
 

Print Page
Documentation

Wet Blast Catalogue
Wet Blast System

 

C/ Marie Curie 68 | P.I. Mora Garay. 33211 Gijón. Principality of Asturias. Spain.  | Tlf.: +34 985308465/66 | Fax.: +34 985324630 | Contact | Legal